Improve Your Fountain Today

liquidvinyl pond fountain

Is your pond’s water fountain not working well? If yes then you should have it fixed right away. You can repair it on your own or get the assistance of experts who can help. Before taking your unit out of the water or having it replaced with a new one, you should find out what needs to be done. Check the behavior of your device, prior to doing anything. Are the lights that are on it becoming dim or are no longer emitting the type of glow that you want to have? Has the performance of the unit become severely weakened? Is your machine no longer operating as it should? You should know which question is appropriate to your situation, before anything else, so that you won’t waste time, money and effort. Take note that troubleshooting may be quite challenging so it would be best for you to use your resources wisely. For some of the things that you could do to improve the condition of the fountain that you own, please keep reading.

Does your unit shoot out water and then turns off randomly from time to time? If this is the case, your device may not be getting the power that it needs to have. For this case, what you could do is to have your machine situated near the power supply. This technique could help, according to experts, since it can reduce the amount of time for energy to travel from a source to the device that needs to be powered. Besides the tip mentioned, you could also try checking the power source that you’re using. After all, it may not be providing the machine that you need to be energized with the power that it needs. On the other hand, it’s not all about the energy.

The problem may be that parts of the fountain that you own have become problematic. If you suspect this, you should take out your water sprayer and then have its parts evaluated. Before doing so, though, you should get the manual of your device so you would have something to base on. If you’re having difficulties, however, you could hire a professional repairman to have your fountain fixed for you. If you’re unsure about your ability to repair your fountain, you should just consult with an expert so that you won’t damage your unit and then make use of your time wisely. As much as possible, though, you should consult with a professional that knows how to repair kasco fountains or fix the specific fountain model that you have.

If you’re concerned about the lights that are attached to the fountains that you have, instead of going over where your device is, you should literally have it taken out of the water or disconnected from a power source. That’s so you wouldn’t be electrocuted. If LED lights are what you want to fix or replace, you don’t really have to hire experts because they can be removed and dealt with easily. But, before you fix anything, you should test the lights that you’re concerned about first. Introduce power to them and check how they respond.

Pond Aerators

liquidvinyl pond aeration

Although all ponds need an effective aeration system in order for them to sustain fish life and stop an overgrowth of algae spoiling the look of the pond and producing an unpleasant odour, some do not have systems because the pond owners claim that the ponds are too far away from a mains outlet to power them. The pond owners that make these claims though are mistaken as; today there are new pond aerators that come with their own independent power source. Some of these systems employ the use of windmills which produce enough current to allow the aeration system they come with, to operate effectively. Other aeration systems are complete with their own solar energy packs which not only provide enough power to allow the system to operate effectively but can provide power for up to 3 days without sunlight having to be present.

There are several different aeration systems available to buy but they are split into two separate classes, those for shallower ponds with depths no more than 6 feet and those for the deeper ponds. The two most common systems for the shallower ponds are the fountain and the propeller systems. Although fountains have been used as aeration systems for many years, they have now been joined by floating fountains which allow more scope for a variety of looks, enhancing the beauty of a healthy pond. As the fountain tosses water into the air, that water is aerated by its contact with the air and as the fountain also creates a circulation of the water in the pond; the pond is effectively aerated. The propeller system works in a similar manner as it too creates a circulation within the pond’s water but instead of tossing the water in the air to get aerated; instead it churns it up allowing it to be aerated that way. For the deeper ponds a diffusion aeration system is required as although both the fountain and propellers do work in shallower ponds, they cannot produce a circulation in the water below 6 feet.

A diffusion system on the other hand, starts the aeration process at the bottom of the pond and works upwards. A diffusion system has three main parts, an air hose, a compressor and a diffusion unit. Although the compressor, because it is linked to the power source, has to be located by the side of the pond, the diffusion unit is placed at the bottom of the pond to ensure that the complete pond gets aerated. The air hose has to therefore be long enough to connect the two. The compressor sends air down the hose to the diffusion unit which then allows the air to escape into the water. As the air released makes its way to the surface, it aerates the water on its way and by doing so, enables even the water at the bottom of the pond to receive sufficient oxygen. As the diffusor works from the bottom up instead of only from the surface, it is an ideal system for depth of pond.