NEVER PAINT AGAIN
Technical Specifications & Testing
SPECIFICATIONS |
|
| PVC Content: | 31.34% |
| Dry Time: | 30-60 minutes with added extender |
| Recommended Film Thickness: |
Base coat: 8 mils wet
/ 4 mils dry Vinyl topcoat: 20 mils wet / 14 mils dry |
| Gloss: | 8 - 10 (O.N.) |
| Finish: | Matte finish (low-gloss) |
| Material VOC: | 0.41 lb/gal (49 grams per liter) |
| Viscosity: | 110 - 120 KRB |
| P/B Ratio: | 1.310 |
| Specific Gravity: | 1.2 |
| Grind: | 4+ |
| PH: | 8.5 - 9 |
| Solids Content by weight: | 64.2%: |
TEST |
TEST METHOD |
RESULT |
| Permeance | ASTM D-1653 | 15.3
perms Excellent breathability |
| Elongation at Break Average | ASTM D-412 | 603% |
| Elongation,
@23'C 55% R.H. crosshead speed 20 cm/min |
ASTM
D-2370 ASTM D-412 Die C dumbell cutter |
120% |
| Tensile Strength | ASTM D-412 | 142 psi |
| Cold Temperature Flexibility | ASTM C-711 | Passes |
| Fungus and Mildew Resistance | ASTM D-3274 | Total
absence of growth |
| Adhesion | ASTM D-1308 | Passes |
| Water Vapor Transmission | ASTM E-96 | 2.12 grains per hr per ft. |
| Accelerated
Weathering 6000 hrs |
ASTM G-26 | No
chalking No discoloration |
| Wind
Driven Rain (98 MPH) Federal specification TTC 555B |
Flow
Rate @ 63 U.S. gal. per hour |
Passed in triplicate |
| Shore A Hardness | ASTM D-2240 | 88 |
| Flame Spread | ASTM E-84 | 5 |
| Smoke Density | ASTM E-84 | 5 |